BS Battery Power Box Air Compact Lithium Battery Charger Station - 1200A


Currently unavailable


Currently unavailable
This BS Battery Power Box Air is for vehicle owners needing a reliable jump starter and portable power solution. Its key benefit is providing up to 20 jump starts and inflating tires with its integrated air compressor. A potential caveat is the complexity of its multiple functions for users seeking a single-purpose device. This compact lithium charger station offers a 1200A peak current jump starter for gasoline (up to 7.0L) and diesel (up to 6.0L) engines, a 150 PSI air compressor, a USB power supply, and an LED flashlight.
| Model Part Number | 700589 |
|---|---|
| Brand | BS Battery |
The BS Battery Power Box Air can provide up to 20 jump starts on a single full charge, depending on the vehicle's battery condition and engine size.
The integrated air compressor has a maximum pressure of 10.3 bar, which is equivalent to 150 PSI.
Yes, it is designed for gasoline engines up to 7.0L and diesel engines up to 6.0L.
Yes, it features spark-proof connection technology and reverse polarity protection to ensure safe operation.
Charging time can vary depending on the power source used (home charger or car charger) and the remaining battery level, but typically takes several hours for a full charge.
You can charge most standard USB-powered devices, including smartphones, tablets, GPS units, and portable speakers, using the appropriate USB cable.
It is recommended to recharge the unit at least every 3-6 months to maintain the battery's health and ensure it is ready when needed.
Ensure the device is adequately charged. Connect it to a power source using the home or car charger and check if the LCD display activates.
Verify that the smart cables are securely connected to both the Power Box Air and the vehicle's battery terminals. Ensure the clamps are making good contact and that the battery is within the compatible engine size limits. Check the LCD for any error indicators.
Confirm the air hose is securely attached to the compressor outlet and the inflation valve. Check if the device has sufficient charge. Ensure the target pressure is set correctly.
Use the correct USB cable for your device. Check if the Power Box Air has sufficient battery charge. Try a different USB cable to rule out cable issues.
Allow the device to charge fully. If the issue persists, contact customer support.
Initial Setup:
Compatibility:
Care and Maintenance: