Ideal Industries Lever Connector - Blue - 32A - 4.00mm² - Pack Of 30
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electricians and DIY enthusiasts working with electrical wiring. The Ideal Industries Blue Lever Connector offers a secure and efficient way to join wires, simplifying installations up to 32A. A key consideration is ensuring the wire gauge is within the 4.00mm² limit to maintain connection integrity.
All features
| Brand | Ideal Industries |
|---|
Extended Product Information
FAQs
Can I use these connectors with stranded wire?
Yes, you can use them with stranded wire, but you will need to lift the lever first before inserting the wire and then close the lever to secure the connection.
What is the maximum wire size this connector can handle?
These connectors are designed to accommodate wires up to 4.00mm².
Are these connectors reusable?
These connectors are designed for permanent installation and are not intended for repeated disconnection and reconnection.
What is the purpose of the check port?
The check port allows for continuity testing of the connected circuit without needing to disconnect the wires, simplifying troubleshooting.
What is the maximum amperage rating for these connectors?
These connectors are rated for applications up to 32A.
Can I use these for all types of electrical applications?
They are suitable for a wide range of applications up to 32A, including lighting, access control, and general circuit wiring.
Troubleshooting
Wire will not insert into the connector
Ensure the wire is straight and the end is cleanly stripped. Verify that the wire's conductor size does not exceed 4.00mm². For solid wire, ensure you are pushing firmly. For stranded wire, ensure the lever is fully open.
Connection feels loose or unreliable
Remove the wire and re-insert, ensuring it is pushed in fully until it stops. For stranded wire, make sure the lever is fully closed. Check that the wire gauge is within the specified range.
Continuity test fails
Confirm that the wire is properly inserted into the connector. Check the continuity of the wire itself. Ensure the test probe is making good contact with the test port.
Pros and Cons
Pros
- Secure wire connections with anti-loosening levers.
- Built-in port for easy continuity testing.
- Suitable for a wide range of applications up to 32A.
- User-friendly design, especially for solid wires.
- Accommodates wires up to 4.00mm².
Cons
- Limited to 4.00mm² maximum wire size.
- Primarily designed for solid wire, may require different approach for stranded.
- Blue color may not match all aesthetic requirements if visible.
Setup, Compatibility & Care
Setup:
- Prepare the wire ends by stripping approximately 10-12mm of insulation.
- For solid wires, simply push the stripped end into the connector entry port until it seats firmly. The lever does not need to be lifted.
- For stranded wires, lift the lever first, insert the stripped wire, and then close the lever firmly.
- Ensure the wire is fully inserted before closing the lever (if applicable).
- Use the integrated test port to check for continuity.
Compatibility:
- Wire Type: Primarily designed for solid conductors, but compatible with stranded conductors by lifting the lever.
- Wire Gauge: Suitable for solid and stranded wires up to 4.00mm².
- Application: Ideal for all applications up to 32A, including lighting, access control, and radial/final ring circuits.
Care:
- These connectors are designed for single-use installation and are not intended for repeated disconnection and reconnection.
- Keep connectors in their original packaging until use to protect them from dust and debris.
- Store in a dry environment.