HB BODY 800 Matting Additive - 1 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of HB BODY 800 Matting Additive, a product designed to reduce the gloss of 1K or 2K paints and clear coats. It allows for creating a matte finish on various surfaces. Keep in mind that achieving the desired matte level may require experimentation with the additive ratio.
All features
| Model Part Number | 8000000001 |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
What is HB BODY 800 Matting Additive used for?
It is used to reduce the gloss of 1K and 2K paints and clear coats, creating a matte finish.
Is it easy to use?
Yes, it is designed for straightforward mixing and application.
What types of clear coats is it compatible with?
It is compatible with both 1K and 2K clear coats.
How should I store the additive?
Store it in a cool, dry place away from direct sunlight. Keep the container sealed when not in use.
What safety precautions should I take?
Use in a well-ventilated area and wear appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection.
What should I do if the finish is not matte enough?
Increase the amount of additive in the mixture and test again.
Can I use this on any surface?
It is suitable for various applications, including automotive and industrial surfaces. Always test a small area first.
Troubleshooting
The finish is not matte enough.
Increase the amount of HB BODY 800 Matting Additive in the mixture. Perform a test application to evaluate the result.
The finish is too matte or has an uneven appearance.
Reduce the amount of additive and ensure even application. Ensure proper mixing and application techniques.
The clear coat is not drying properly.
Check the clear coat's technical data sheet for drying times and conditions. Ensure that the correct hardener and thinner are used.
Pros and Cons
Pros
- Achieves a consistent matte finish.
- Compatible with a wide range of clear coats.
- Easy to mix and apply.
- Enhances the aesthetic appeal of painted surfaces.
- Improves the durability of the paint finish.
Cons
- Requires careful measurement for desired results.
- May require testing to achieve the perfect matte level.
- Can alter the original properties of the clear coat if used incorrectly.
- May not be suitable for all types of paints and surfaces.
- Requires proper ventilation during application.
Setup, Compatibility & Care
Setup: Ensure you have adequate ventilation and personal protective equipment (PPE), including a respirator, gloves, and eye protection. Prepare the surface to be painted. Mix the additive with the clear coat, following the instructions on the product label and the clear coat’s technical data sheet.
Compatibility: This additive is compatible with both 1K and 2K clear coats. Always check the clear coat's technical data sheet to confirm its compatibility. Perform a test application on a hidden area to ensure compatibility before applying it to the entire surface.
Care: Store the additive in a cool, dry place away from direct sunlight. Seal the container tightly after each use to prevent contamination and evaporation. Clean up any spills immediately using appropriate solvents and follow all local regulations for waste disposal.