Silca Super Secret Chain Lube - 2oz
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Silca Super Secret Chain Lube is designed for cyclists seeking the speed and quiet operation of a hot-melt waxed chain with the convenience of a drip-applied lubricant. It utilizes nano-scale Tungsten Disulfide for maximum performance. A key caveat is the requirement for a meticulously clean chain before application for optimal results.
All features
| Model Part Number | SIAMAC015ASY080 |
|---|---|
| Brand | Silca |
Extended Product Information
FAQs
What makes this lube 'Super Secret'?
The 'Super Secret' refers to its ability to provide the performance benefits of a hot-melt wax-dipped chain with the convenience of a drip-applied lubricant, incorporating advanced additives like Tungsten Disulfide.
How often should I reapply Silca Super Secret Chain Lube?
Reapplication frequency depends on riding conditions, but typically it is needed after long rides or when you notice increased noise or friction. Always reapply to a clean, dry chain.
Can I use this lube on a new, factory-lubed chain?
No, for optimal performance, the factory lubricant must be completely removed. The chain needs to be stripped down to its base metal and thoroughly cleaned before applying Silca Super Secret Chain Lube.
What is Tungsten Disulfide?
Tungsten Disulfide (WS2) is an advanced solid lubricant that has an extremely low coefficient of friction, making it highly effective at reducing wear and improving performance in mechanical systems like bicycle chains.
How long does the lubricant need to dry?
A minimum of 30 minutes is required before riding. For best results and longevity, allowing it to dry for several hours or overnight is recommended.
Is this lube suitable for mountain biking in wet conditions?
While it offers good lubrication, it is not a heavy-duty wet lube. For consistently wet and muddy conditions, additional reapplication may be necessary, and thorough cleaning after each ride is crucial.
What sizes is this product available in?
The Silca Super Secret Chain Lube is available in 2oz, 4oz, and 8oz sizes.
Troubleshooting
Chain still noisy after application
Ensure the chain was completely clean before application and allowed to dry for the recommended minimum time. Reapply if necessary, ensuring proper cleaning and drying.
Lube appears to be washing off quickly
The chain may not have been properly cleaned, or the lube did not have sufficient drying time to cure. Ensure a thorough cleaning and allow adequate drying time, especially in humid conditions.
Sticky or gummy chain feel
This can indicate insufficient drying time or application of too much product. Ensure the lubricant has fully dried and consider wiping off any excess before riding.
Pros and Cons
Pros
- Achieves performance similar to hot-melt waxing with easier application.
- Exceptional reduction in friction due to Tungsten Disulfide.
- Results in a very quiet drivetrain.
- Environmentally friendlier formulation.
- Contributes to cleaner drivetrain operation compared to traditional lubes.
Cons
- Requires a thoroughly clean chain for best results.
- Drying time of at least 30 minutes before riding is necessary.
- May be more expensive than standard chain lubes.
- Application process demands attention to detail.
Setup, Compatibility & Care
Setup:
- Thorough Cleaning: The most critical step is to ensure your chain is exceptionally clean. Remove all old lubricants, grease, and dirt. Degreasing and rinsing thoroughly is recommended.
- Drying: Ensure the chain is completely dry before application.
- Application: Apply the lube drip by drip to each roller of the chain. Rotate the pedals backward to ensure full coverage.
- Drying Time: Allow the lubricant to dry for at least 30 minutes before your first ride. For best performance, longer drying times (up to a few hours or overnight) are beneficial.
Compatibility:
This lubricant is compatible with most bicycle chains. However, it is designed to work best on chains that have been thoroughly cleaned and are free of existing lubricants. It is not recommended to mix this lubricant with other types of chain lubes.
Care:
Reapply as needed, typically after long rides or in wet conditions. Always ensure the chain is clean and dry before reapplication. Store the bottle in a cool, dry place.