PRO LT Stem - Alloy - 110mm - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The PRO LT Stem is designed for adult cyclists seeking a durable and budget-friendly handlebar stem. Its key benefit is the high strength-to-value ratio offered by its 3D forged aluminum construction, ensuring reliability without a high cost. A potential caveat for some riders might be its fixed rise angle options, requiring careful selection for desired riding position. This stem provides essential functionality for everyday cycling and performance builds, featuring a secure four-bolt faceplate and compatibility with standard bar and steerer tube diameters.
All features
| Gender | Unisex |
|---|---|
| Age Group | adult |
| Colour | Black |
| Model Part Number | 8717009339780 |
| Brand | PRO |
Extended Product Information
FAQs
What is the material of the PRO LT Stem?
The PRO LT Stem is constructed from 3D forged 6061 aluminum, which provides high strength and excellent corrosion resistance.
What size steerer tube does this stem fit?
This stem is designed to fit a 1-1/8 inch steerer tube.
What is the handlebar clamp diameter?
The handlebar clamp diameter is 31.8mm, which is compatible with most modern handlebars.
Can I adjust the angle of the stem?
Yes, the stem is reversible and allows for a +/- 6-degree rise, enabling you to adjust your riding position.
Is this stem suitable for carbon handlebars?
Yes, it is suitable for carbon handlebars. Ensure you use a torque wrench to tighten bolts to the specified values and consider using carbon assembly paste for optimal grip and to prevent damage.
How do I clean the PRO LT Stem?
Clean the stem with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents.
What is the weight of the PRO LT Stem?
Specific weight information is not provided in the product description, but it is designed to offer a balance of strength and value.
Troubleshooting
Handlebars slipping or rotating under load
Ensure all four faceplate bolts are tightened evenly in a cross pattern to the correct torque specification. Check that the handlebar surface and stem clamp area are clean and free of grease or debris. If using carbon handlebars, ensure appropriate carbon assembly paste is used.
Stem creaking or making noise
Check that all steerer clamp bolts and faceplate bolts are tightened to the correct torque. Ensure the steerer tube and headset are properly adjusted and greased. Apply a small amount of friction paste (especially for carbon components) to the contact surfaces between the stem and steerer tube, and the stem and handlebar.
Difficulty installing handlebar
Loosen the faceplate bolts completely. Ensure the handlebar is inserted straight into the clamp and not at an angle. If using a particularly wide or thick-walled handlebar, confirm it meets the 31.8mm clamp specification.
Pros and Cons
Pros
- Excellent strength and durability from 3D forged aluminum.
- Budget-friendly option for reliable performance.
- Secure handlebar mounting with the four-bolt faceplate.
- Adjustable riding position with reversible +/- 6-degree rise.
- Wide compatibility with standard bar and steerer tube sizes.
Cons
- Limited rise angle adjustment compared to some higher-end stems.
- May not offer the ultra-lightweight performance desired by competitive racers.
- Basic aesthetic, focusing on function over form.
Setup, Compatibility & Care
Setup:
- Ensure your fork steerer tube is the correct diameter (1-1/8 inch).
- Identify the desired rise angle (+/- 6 degrees) by orienting the stem accordingly on the steerer tube.
- Loosely attach the stem to the steerer tube using the provided steerer tube clamp bolts. Tighten them evenly to the manufacturer's recommended torque specification (typically 4-6 Nm) using a torque wrench.
- Install your handlebar into the faceplate clamp, ensuring it is centered.
- Re-attach the faceplate using the four faceplate bolts. Tighten these bolts in a cross pattern, gradually increasing torque until each bolt reaches the manufacturer's recommended specification (typically 4-6 Nm).
Compatibility:
- Steerer Tube Diameter: 1-1/8 inch
- Handlebar Clamp Diameter: 31.8mm
Care:
- Clean the stem regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents.
- Periodically check all bolts for tightness, especially after the first few rides and every few months. Use a torque wrench to ensure bolts are tightened to specification.
- Inspect the stem for any signs of damage, such as cracks or significant dents. If damage is found, the stem should be replaced immediately.