Marlborough Carcassing Timber - 47mm x 150mm x 3600mm - Pack of 5
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Marlborough Carcassing Timber is an ideal solution for contractors and DIY enthusiasts who need high-strength, load-bearing wood for structural projects such as roofing, flooring, and wall framing. These Scandinavian softwood lengths provide exceptional durability and dimensional stability due to the kiln-drying process, though users should note they are strictly intended for above-ground use only.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | 0793254521314 |
| Brand | Cheshire |
Extended Product Information
FAQs
What is the C24 grading for?
C24 is a structural grade that indicates the timber has high load-bearing capacity, making it suitable for floors, roofs, and wall framing.
Can I use this timber for a fence post in the ground?
No. This timber is Use Class 3 (UC3) rated, meaning it is only suitable for above-ground use. It should not be in direct contact with the ground.
How many pieces are included in this pack?
The pack contains 5 lengths of timber, each measuring 3600mm long.
Does the timber require additional treatment?
It is already pressure treated for fungal and insect protection, but you may apply a wood stain or exterior sealant if you wish to alter the appearance or provide extra UV protection.
What does kiln-dried mean for this product?
Kiln-drying removes excess moisture from the wood, which increases its strength and reduces the likelihood of the wood twisting or warping after installation.
Troubleshooting
Timber shows slight surface moisture upon delivery
Store in a dry, covered area off the ground to allow for proper air circulation.
Difficult to drive screws into the timber
Pre-drill pilot holes with a slightly smaller diameter than the screw shank to prevent the wood from splitting.
Cutting creates rough edges
Use a sharp, high-tooth-count saw blade and cut at a steady speed to ensure a clean finish.
Pros and Cons
Pros
- High structural integrity with C24 grading
- Enhanced resistance to movement thanks to kiln-drying
- Protection against fungal and insect damage
- Sustainably sourced from responsible forests
- Consistent dimensions for professional construction results
Cons
- Not suitable for direct ground contact
- Heavy to transport due to solid softwood composition
- Limited to above-ground structural applications
Setup, Compatibility & Care
To ensure the longevity of your project, always store the timber in a dry, well-ventilated area until installation. If you need to cut the timber during assembly, remember that any exposed raw ends should be resealed with a suitable timber preservative to maintain the integrity of the treatment. While the timber is UC3-rated, avoid using it in areas where it will have direct contact with the ground or standing water. Use standard carpentry tools, such as circular saws and drills, to work with the material; consider pre-drilling holes for screws to prevent splitting at the ends of the boards.