TruConnect Terminal Blocks - 7.62mm 6 Way 15A 300V Header Right Angle Side Entry Open
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for engineers and technicians requiring reliable electrical connections. The TruConnect 211869 terminal block offers a secure and straightforward method for connecting wires with its right-angle side entry and open-ended design. A key consideration is its specific pitch and pole count, which must match project requirements.
All features
| Model Part Number | 211869 |
|---|---|
| Brand | TruConnect |
Extended Product Information
FAQs
What is the pitch of this terminal block?
The pitch of the TruConnect 211869 terminal block is 7.62mm.
What is the maximum current and voltage rating?
This terminal block is rated for a maximum of 15A and 300V.
What does 'open ended' mean in the product description?
'Open ended' refers to the terminal design where wires can be inserted directly without needing to be pre-crimped onto a pin. This simplifies the termination process.
Can this header be used without a mating receptacle?
No, this is a header connector. It requires a compatible receptacle to form a complete connection for your wires.
What are the advantages of a right-angle side entry?
A right-angle side entry allows cables to exit the connector perpendicular to the mounting surface, which is ideal for applications with limited vertical space or when neat cable management is desired.
How many connection points does this header have?
This header has 6 poles, meaning it provides 6 individual connection points for wires.
Is this terminal block suitable for outdoor use?
The product information does not specify environmental ratings for outdoor use. It is generally recommended for indoor applications unless specifically rated otherwise and properly protected.
Troubleshooting
No connection or intermittent signal
Ensure wires are fully inserted and properly stripped. Verify that the mating receptacle is securely attached to the header and that it is the correct 7.62mm pitch compatible part. Check for any damage to the header pins or receptacle contacts.
Overheating during operation
Confirm that the connected wires and the load do not exceed the 15A rating. Ensure good contact integrity. If the issue persists, the application might require a terminal block with a higher current rating.
Difficulty inserting wires
Ensure the wire ends are neatly stripped and not frayed. The terminal block is designed for specific wire gauges; check compatibility. Do not force wires; they should slide in with moderate pressure.
Pros and Cons
Pros
- Compact right-angle design for space-saving installations.
- High current and voltage ratings for versatility.
- Durable construction for reliable, long-term connections.
- Easy wire termination due to the open-ended feature.
Cons
- Fixed pitch of 7.62mm may not suit all applications.
- Requires a compatible mating connector for a complete connection.
- Open-ended design might require extra care to prevent accidental disconnections.
- Limited to 6 poles, which may not be sufficient for very complex systems.
Setup, Compatibility & Care
Setup: To use the TruConnect 211869, strip the wire ends to the appropriate length (refer to connector documentation for exact stripping length) and insert them into the open-ended terminals. Ensure the wires are fully seated. This header requires a compatible receptacle (sold separately) for a complete circuit. Connect the receptacle to the header, ensuring a firm and secure mating.
Compatibility: This terminal block is designed to mate with corresponding 7.62mm pitch receptacles. Always verify that the receptacle's specifications (current, voltage, pole count) match those of the header (211869) and your application's requirements.
Care: Keep the terminal block clean and free from dust and debris. Avoid exposure to excessive moisture or corrosive substances. When disconnecting, gently pull the receptacle away from the header; avoid pulling on the wires.