Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Guild Lane Chroma Enamel Fuelproof Paint is specifically engineered for model enthusiasts and hobbyists who require a durable, professional-grade finish that withstands exposure to fuels. Providing a rich and even coat, this 400ml aerosol is perfect for both intricate detailing and broad coverage on scale models. While it offers exceptional resilience, users should note that as an enamel-based product, it requires proper ventilation during application and adequate drying time to reach its full chemical resistance.
| Model Part Number | CHR6515 |
|---|---|
| Brand | Guild Lane |
While the paint is fuel-proof on its own, applying a clear coat can provide extra protection and depth if desired.
Yes, it is suitable for plastics, but always use a suitable primer first for optimal adhesion.
While it is touch-dry quickly, allow at least 24 hours for the paint to fully cure and achieve maximum fuel resistance.
You can usually paint over cured acrylics, but avoid applying acrylics over wet enamel as it may cause lifting.
Use a standard enamel thinner or white spirit while the paint is still wet.
You are applying the paint too heavily; apply thinner coats from a greater distance.
Remove the nozzle and soak it in a suitable enamel thinner or replace it if damaged.
The spray distance is too far; bring the nozzle closer and ensure the air temperature is within recommended limits.
To achieve the best results, shake the canister vigorously for at least two minutes before starting. Ensure the ambient temperature is between 15°C and 25°C for the best flow. Always test on a scrap piece of plastic or metal before applying to your final model to check for compatibility with your base coat. After use, invert the can and spray for a few seconds to clear the nozzle, preventing clogging. Store the aerosol in a cool, dry place away from direct sunlight to maintain the integrity of the enamel.
