G.Skill Ripjaws V - 128 GB - 4 x 32 GB - DDR4 - 2666 MHz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The G.Skill Ripjaws V 128GB (4x32GB) DDR4 memory kit is designed for professionals and power users who require massive memory overhead for high-end workstations, 3D rendering, and heavy multitasking. This high-capacity kit delivers consistent reliability and stability for demanding computing tasks; however, its 2666 MHz clock speed means it is better suited for workstation productivity rather than extreme competitive gaming performance.
All features
| Series | Ripjaws V |
|---|---|
| Model Part Number | F4-2666C19Q-128GVK |
| Brand | G.Skill |
Extended Product Information
FAQs
Does this memory kit support ECC?
No, this is non-ECC (unbuffered) memory designed primarily for high-end consumer and enthusiast workstations.
Can I use these on an AMD system?
Yes, while it is optimized for Intel XMP 2.0, the modules are compatible with many AMD platforms, though you may need to manually tune the settings in the BIOS.
What is the CAS latency for this kit?
This specific kit has a CAS latency of 19.
Are these modules too tall for my CPU cooler?
With a 42mm height, they are designed to fit under most standard and large-scale air-cooled CPU heatsinks.
Do I need to do anything to enable the full speed?
Yes, you must enable the XMP 2.0 profile in your motherboard BIOS settings to ensure the RAM runs at its advertised performance specifications.
Troubleshooting
System fails to post or boot
Ensure all modules are seated firmly in the DIMM slots. Try booting with a single module to determine if a specific stick is faulty.
Memory is running at slower than rated speed
Enter the BIOS and ensure that the Intel XMP 2.0 profile is enabled. Without this setting, the BIOS may default to a lower JEDEC speed.
Blue screen or system instability
Run a memory diagnostic tool (like MemTest86) to identify potential data corruption. Check for BIOS updates for your motherboard, as these often improve memory compatibility.
Pros and Cons
Pros
- Ultra-high 128GB capacity for massive multitasking
- Excellent compatibility with most CPU coolers due to 42mm height
- Energy-efficient operation at 1.2V
- Validated for reliability on major motherboard platforms
- Easy setup with Intel XMP 2.0 profiles
Cons
- 2666 MHz speed may be slower than enthusiast-grade kits
- CAS latency of 19 is not optimized for low-latency gaming
- Requires a motherboard that supports 32GB module density
Setup, Compatibility & Care
Installation of the Ripjaws V kit is straightforward due to the standard DIMM form factor. To ensure the memory reaches its rated performance, you must enter your motherboard's BIOS/UEFI upon the first boot and enable the XMP (Extreme Memory Profile) 2.0 feature.
Before purchasing, verify that your motherboard supports 32GB individual modules, as some older DDR4 boards may have a maximum capacity limit per slot. When handling the modules, hold them by the edges to avoid touching the gold contact pins. Since this is a quad-module kit, ensure they are installed in the correct slots (typically slots 1-3 or 2-4 depending on your board's layout) to take full advantage of dual or quad-channel memory architectures.