Shopping.co.uk

Everbuild Triple Action Wood Treatment - Clear - 25L

Not AvailableEverbuild Triple Action Wood Treatment - Clear - 25L
Not Available

Protect your timber inside and out with Everbuild Triple Action Wood Treatment, a powerful 3-in-1 ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for homeowners and trade professionals seeking a comprehensive solution for wood protection. The Everbuild Triple Action Wood Treatment offers a powerful 3-in-1 formula to kill existing issues and protect against future threats like rot, fungi, and insects. A key benefit is its ability to be applied to damp timber, reducing preparation time. However, users should be aware that it provides a clear finish, which may not be suitable for projects requiring a specific colored stain.

All features

Model Part NumberPTDSIKDIRLJUN25
BrandEverbuild

Extended Product Information

FAQs

Can I apply this treatment to wood that is already painted or varnished?

No, for maximum effectiveness, the wood surface should be clean and free from existing paint, varnish, or sealants. Remove these coatings before application.

How long does the protection last?

The treatment provides long-lasting protection against rot, fungi, and insects. The exact duration depends on environmental exposure and wood condition, but it is designed for durable, ongoing preservation.

Is it safe to use indoors?

Yes, the Everbuild Triple Action Wood Treatment is solvent-free, low-odour, and non-flammable, making it safe for interior use when applied in a well-ventilated area.

What is the coverage rate?

The approximate coverage rate is 3–5 m² per litre, depending on the porosity and surface type of the wood being treated.

Can I apply this to wood that is currently wet?

Yes, a key feature of this product is its ability to be applied to damp timbers without losing effectiveness.

Will this treatment change the color of my wood?

No, the treatment dries clear, preserving the natural appearance of the wood.

What types of wood problems does this treatment address?

It addresses wet rot, dry rot, decay, fungi, and wood-boring insects, providing a comprehensive solution.

Troubleshooting

Wood still shows signs of rot/infestation after treatment.

Ensure the product was applied thoroughly and allowed to penetrate. For severe cases, remove decayed wood and apply additional coats. Check if the source of moisture causing rot has been addressed.

Uneven finish or poor absorption.

Verify the timber surface was properly prepared and free of contaminants like wax or oil. Ensure the wood was not saturated with water before application, as this can hinder absorption.

Product appears cloudy or separates in the container.

Stir the product thoroughly before and during application. Separation can occur over time but should resolve with proper mixing.

Slow drying time.

Drying times can be affected by temperature, humidity, and application thickness. Ensure good ventilation and avoid applying in very cold or damp conditions. Apply thinner coats if possible.

Pros and Cons

Pros

  • Comprehensive 3-in-1 treatment for multiple wood issues.
  • Effective protection against rot, fungi, and insects.
  • Can be applied to damp wood, saving time.
  • Fast-drying and non-flammable for safe and efficient use.
  • Suitable for a wide variety of interior and exterior timber applications.
  • Maintains the natural appearance of wood with a clear finish.

Cons

  • Clear finish may not be suitable for decorative projects requiring color.
  • Requires approximately 3-5 m² per litre coverage, so large projects may need significant volume.
  • As a solvent-free low-odour product, it's designed for deep penetration and preservation, not as a decorative topcoat.
  • Effectiveness relies on proper application and adherence to drying times between coats if multiple are needed for severe issues.

Setup, Compatibility & Care

Application:

  1. Ensure the timber surface is clean and free from loose debris, paint, or varnish. Remove any existing decay if possible.
  2. The product can be applied to damp or dry timber.
  3. Apply using a brush, suitable spray, or dip method.
  4. Allow approximately 3-5 m² per litre coverage, depending on the porosity and condition of the wood.
  5. For heavily infested or severely decayed wood, multiple applications may be necessary, allowing sufficient drying time between coats as recommended for the specific issue.

Compatibility:

  • Suitable for all types of timber and joinery, including hardwoods and softwoods.
  • Ideal for interior and exterior use on sheds, fences, beams, doors, floorboards, and garden furniture.
  • Can be overcoated with most common wood stains and paints once fully dry, though patch testing is recommended.

Care & Storage:

  • Store in original, tightly sealed containers in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep out of reach of children and pets.
  • Dispose of empty containers and product residues responsibly according to local regulations.