12V Car Power Lead Cigarette Socket Auxiliary Connect to Battery Crocodile Clips - Bumper - B036
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 12V car power lead from Bumper (model B036) is designed for drivers who need an auxiliary power source, such as a cigarette lighter socket, where one isn't fitted or when operating devices outside the vehicle's standard outlets. Its key benefit is providing direct battery power via heavy-duty crocodile clips for reliable connectivity. A potential caveat is the 10A maximum power limit, which users should be mindful of when selecting devices to power.
All features
| Model Part Number | B036 |
|---|---|
| Brand | Bumper |
Extended Product Information
FAQs
What is the maximum power this lead can supply?
This power lead has a maximum power rating of 10 Amps.
Can I use this lead with a 24V system?
No, this lead is designed exclusively for 12-volt vehicle systems.
How do I safely disconnect the lead?
Always disconnect the black (negative) crocodile clip first, followed by the red (positive) crocodile clip. Ensure the engine is off before disconnecting.
What if my battery terminals are dirty?
For optimal connection, clean any corrosion or dirt from the battery terminals before attaching the crocodile clips. A battery terminal brush can be used for this purpose.
Can this be used to jump-start a car?
No, this product is a power lead for auxiliary sockets and is not designed for jump-starting a vehicle.
What is the length of the cable?
The cable is 600 mm (approximately 2 feet) long.
Troubleshooting
No power to the connected accessory
Ensure both crocodile clips are securely attached to the correct battery terminals (red to positive, black to negative). Check that the accessory itself is functioning correctly and is within the 10A power limit. Verify the accessory's plug is fully inserted into the socket.
Intermittent power supply
Check for a loose connection at the crocodile clips or the accessory socket. Ensure the battery terminals are clean and free of corrosion. Make sure the cable is not damaged.
Accessory draws too much power and causes issues
The lead is rated for a maximum of 10A. If your accessory exceeds this, it will not function correctly or may cause the lead to overheat. Use only accessories rated at 10A or less.
Pros and Cons
Pros
- Provides a convenient 12V power source directly from the battery.
- Heavy-duty crocodile clips ensure a secure and reliable connection.
- Useful for vehicles with limited or no existing cigarette lighter sockets.
- Suitable for powering a variety of 12V accessories up to 10A.
Cons
- Requires direct connection to the car battery, which may not be ideal for all users.
- The 10A maximum power limit might restrict the use of very high-draw accessories.
- Cable length of 600 mm may be limiting for certain installations or uses.
Setup, Compatibility & Care
Setup:
- Ensure your vehicle's engine is off and the ignition is in the 'off' position.
- Identify the positive (+) and negative (-) terminals on your vehicle's battery.
- Attach the red crocodile clip to the positive (+) terminal of the battery.
- Attach the black crocodile clip to the negative (-) terminal of the battery.
- Ensure clips are securely fastened and not obstructing any moving engine parts.
- Plug your 12V accessory into the cigarette lighter socket.
Compatibility:
This power lead is compatible with all 12-volt vehicle electrical systems. It is designed to power accessories that draw a maximum of 10 Amps. Always check the power requirements of your accessory before use.
Care:
- After use, disconnect the crocodile clips in the reverse order of attachment (negative first, then positive).
- Store the power lead in a clean, dry place, ensuring the cable is not kinked or damaged.
- Periodically inspect the crocodile clips and cable for any signs of wear or damage. Do not use if damaged.