Warren Reed - Designer Vivid Serenity Kitchen Splashback - W700mm x H750mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners looking to upgrade their kitchen's aesthetics and functionality with a durable, stylish splashback. The key benefit is a striking focal point that is also easy to maintain. A potential caveat is the need for specific adhesive for installation. This premium 6mm toughened glass splashback features a high-resolution print, offering both beauty and practicality for any kitchen renovation or update.
All features
| Model Part Number | WR00799-P448 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
A clear, natural-curing adhesive is recommended. We suggest using ColorSpray Splashback Adhesive and Sealant for optimal results.
Can I drill holes in the splashback for sockets?
No, drilling holes in the glass is not recommended as it can compromise the toughened glass and lead to breakage. If socket cutouts are required, please select a splashback model that already incorporates these.
How do I clean the splashback to keep it looking new?
Use a soft, damp cloth with a mild, non-abrasive kitchen cleaner. Wipe dry with a lint-free cloth to prevent streaks and maintain shine.
Is the splashback heat resistant?
Yes, the toughened glass is designed to withstand temperatures up to 400°C, making it suitable for use behind most hobs.
What are the available sizes for this splashback?
This model is available in various sizes, including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, 600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
What is the warranty period for this splashback?
The splashback comes with a 1-year guarantee.
Can this splashback be installed over existing tiles?
It is generally possible to install over smooth, flat tiles if the surface is properly prepared and the adhesive is suitable. However, for best results and adhesion, installation on a flat, clean wall is recommended.
Troubleshooting
Splashback is not adhering to the wall
Ensure the wall surface was thoroughly cleaned, dried, and degreased before application. Verify that the correct type of natural-curing adhesive was used and applied evenly. Check the adhesive's curing time and ensure it has been fully respected.
Surface appears streaky after cleaning
Use a lint-free cloth and a mild, non-abrasive cleaner. Avoid excess water. Wipe dry immediately after cleaning to prevent streaks.
Minor chips or scratches noticed
While designed to be scratch-resistant, sharp impacts can cause damage. For minor chips or scratches that do not compromise structural integrity, a clear glass repair kit might offer a cosmetic solution. However, significant damage may require replacement.
Pros and Cons
Pros
- Durable and long-lasting toughened glass construction
- Easy to clean and maintain hygiene
- Scratch and heat resistant for practical kitchen use
- Adds significant aesthetic value and a modern look
- Available in multiple sizes to fit various kitchen layouts
Cons
- Requires specific adhesive for installation; adhesive not always included
- Glass can be heavy, requiring careful handling during installation
- While scratch-resistant, very sharp objects could potentially cause damage
- Limited to wall applications, not suitable for countertops
- One-year guarantee may be shorter than some alternatives
Setup, Compatibility & Care
Installation:
- Ensure the wall surface is clean, dry, and free from dust or grease.
- Apply a clear, natural-curing adhesive evenly to the back of the splashback or the wall, following the adhesive manufacturer's instructions. ColorSpray Splashback Adhesive and Sealant is recommended.
- Carefully position the splashback onto the wall, pressing firmly to ensure good adhesion.
- Allow the adhesive to cure completely as per product instructions before using the kitchen.
Compatibility:
This splashback is designed for wall mounting in kitchens. It is compatible with most standard wall types when the correct adhesive is used. Ensure the wall is structurally sound to support the weight of the glass.
Care:
Clean the surface regularly with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid using abrasive pads or harsh chemicals that could damage the finish or the glass.