Johnstone's Trade Stormshield Flexible Gloss - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect exterior woodwork and metal with a durable, high-shine finish. Johnstone's Trade Stormshield Flexible Gloss provides up to 8 years of protection against the elements, resisting cracking, blistering, and flaking. Keep in mind that for optimal performance, it is designed to be used with Johnstone's Stormshield Flexible Primer Undercoat.
All features
| Colour | White |
|---|---|
| Brand | Johnstone's Trade |
Extended Product Information
FAQs
What surfaces can I use this paint on?
Johnstone's Trade Stormshield Flexible Gloss is designed for exterior woodwork and metal surfaces.
How long will the paint last?
It provides up to 8 years of protection.
Do I need to use a primer?
Yes, for optimal performance, it is designed for use with Johnstone's Stormshield Flexible Primer Undercoat.
How much area can I cover with one litre?
You can expect to cover approximately 14-16 m2 per litre.
How should I apply the paint?
You can apply it with a brush or a roller.
How do I prepare the surface before painting?
Ensure the surface is clean, dry, and free from any loose paint or debris. Sand the surface for better adhesion.
How many coats should I apply?
Apply at least two coats for best results.
How do I clean the application tools?
Clean brushes and rollers with white spirit immediately after use.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean and properly prepared. Make sure the correct primer undercoat has been used.
Paint is cracking or flaking.
Check if the surface was properly prepared. Ensure the product is not applied too thick.
Uneven finish.
Ensure the paint is stirred well before application. Apply an even coat with a brush or roller.
Slow drying time.
Make sure the ambient temperature is correct for drying. Avoid applying in high humidity or cold conditions.
Pros and Cons
Pros
- Durable, long-lasting protection for up to 8 years.
- High-shine finish enhances the appearance of treated surfaces.
- Excellent resistance to cracking, blistering, and flaking.
- Good coverage rate, making it cost-effective.
- Designed specifically for exterior woodwork and metal.
Cons
- Requires the use of a specific primer undercoat for optimal performance.
- Application requires careful surface preparation for best results.
- The high-shine finish may not be suitable for all aesthetic preferences.
- Needs proper stirring before use.
- Limited colour options within the Johnstone's Trade Stormshield Flexible Gloss range.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Remove any existing flaking paint and sand the surface for better adhesion.
- Priming: Apply Johnstone's Stormshield Flexible Primer Undercoat to the prepared surface and allow it to dry completely according to the manufacturer's instructions.
- Application: Stir the Stormshield Flexible Gloss thoroughly before use. Apply using a brush or roller, ensuring even coverage.
- Drying: Allow each coat to dry completely before applying subsequent coats. Follow the manufacturer's recommended drying times.
- Compatibility: This product is specifically designed to be used with Johnstone's Stormshield Flexible Primer Undercoat. Using other primers may affect performance.
- Care: Regularly inspect painted surfaces for damage or wear and tear. Clean the surface with a mild detergent and water as needed. Avoid using abrasive cleaners.