Fluorescent Bright Neon Spray Paint - Inspired Essentials - 7
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Fluorescent Bright Neon Spray Paint from Inspired Essentials is designed for DIY enthusiasts, artists, and anyone needing highly visible coatings on various surfaces. Its key benefit is the extra bright, neon finish that stands out, ideal for creative projects or highlighting hazards. A potential caveat is its specific use case, requiring proper ventilation due to its aerosol nature. The product offers seven distinct fluorescent colors, dries quickly, and is suitable for both interior and exterior applications on wood, metal, brick, and most plastics, leaving a fantastic finish.
All features
| Model Part Number | 7 |
|---|---|
| Brand | Inspired Essentials |
Extended Product Information
FAQs
How many colors are included in the 7-pack?
The 7-pack includes Red, Pink, Blue, Orange, Yellow, Green, and Purple fluorescent neon spray paints.
What is the volume of each can?
Each aerosol can contains 200ml of paint.
Can this paint be used on fabric?
While designed for wood, metal, brick, and plastics, compatibility with fabric may vary. It is recommended to test on a small, inconspicuous fabric area first.
Is this paint weatherproof for outdoor use?
Yes, it is suitable for exterior application. However, prolonged exposure to harsh weather and UV rays may cause some fading over time.
How long does the paint take to dry?
The paint is quick-drying, typically allowing for recoating within a short period, often minutes. Allow for full curing as per standard paint guidelines.
Do I need a primer before using this paint?
A primer is not always necessary, especially on well-prepared surfaces. However, for the most vibrant and consistent results, especially with fluorescent colors, applying a white primer is recommended.
How should I clean up spills or mistakes?
For fresh spills, clean immediately with a suitable solvent. For dried paint, careful scraping or sanding may be required, depending on the surface.
Troubleshooting
Uneven spray or spitting
Shake the can more vigorously and ensure the nozzle is clear. If clogging persists, try a different nozzle or replace the can.
Paint not adhering to the surface
Ensure the surface is clean, dry, and free from grease or dust. Sanding glossy surfaces may improve adhesion. Re-test compatibility on the specific material.
Poor color vibrancy
Ensure the can was shaken sufficiently. For optimal brightness, apply to a primed white surface.
Clogged nozzle after use
Immediately after spraying, turn the can upside down and spray briefly until only clear propellant emerges to clear the nozzle.
Pros and Cons
Pros
- Provides exceptionally bright and noticeable neon colors.
- Versatile application on a wide range of common materials.
- Fast drying time enhances user efficiency.
- Suitable for both indoor and outdoor environmental conditions.
- Excellent for safety markings or high-impact visual designs.
Cons
- Requires good ventilation due to aerosol propellant.
- May not be suitable for all types of plastics without testing.
- Coverage and finish can vary significantly based on surface preparation.
- Fluorescent colors may fade over extended direct sunlight exposure.
Setup, Compatibility & Care
Setup:
- Ensure the application area is well-ventilated. Open windows or work outdoors.
- Protect surrounding areas with newspaper or drop cloths to prevent overspray.
- Shake the aerosol can vigorously for at least two minutes after the mixing ball begins to rattle.
- Perform a test spray on an inconspicuous area or scrap material to check compatibility and desired finish.
Compatibility:
This spray paint is suitable for most porous and non-porous surfaces including:
- Wood
- Metal
- Brick
- Most Plastics (test on a small area first)
Care:
- Store cans upright in a cool, dry place away from direct sunlight and heat.
- After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent clogging.
- Clean any accidental drips or overspray immediately with appropriate solvents (refer to solvent compatibility for the surface type).