Hager KH Terminal - KH24C
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Hager KH terminal block (KH24C) is designed for electricians and installers needing a reliable main cable branch terminal. Its key benefit is providing 4 connections per pole for versatile wiring of 16/25 mm² cables, ensuring safe and efficient power distribution. A caveat to note is its specific application as a main branch terminal, not for general-purpose junction boxes.
All features
| Model Part Number | KH24C |
|---|---|
| Brand | HAGER |
Extended Product Information
FAQs
What is the maximum current this terminal block can handle?
The Hager KH24C terminal block has a nominal current rating of 80A.
What wire sizes can be used with the KH24C?
It is designed to accommodate wiring sizes of 16 mm² and 25 mm².
How many connection points does the KH24C offer?
The terminal block features 4 poles, with 4 connection points available on each pole, totaling 16 connections.
Can this terminal block be used for general junction box applications?
No, this model is specifically designed as a main cable branch terminal and is optimized for that purpose.
Is this terminal block safe to touch during operation?
Yes, the KH24C features a finger-safe design to prevent accidental contact with live electrical parts.
What type of connection does it use?
It uses secure screw clamp connections for reliable electrical contact.
How is this terminal block mounted?
It is designed for standard DIN rail mounting.
Troubleshooting
Terminal block not holding wire securely
Ensure the correct wire gauge is used (16/25 mm²). Check if the screw clamp is properly tightened. Make sure the conductor is fully inserted before tightening.
Overheating at connection point
Verify that the wire gauge and type are within the specified limits for the 80A rating. Ensure screws are tightened appropriately. Check for corrosion or damage on the conductor or terminal.
Difficulty mounting to DIN rail
Confirm that the DIN rail is a standard 35mm profile. Ensure the mounting clip on the terminal block is not obstructed or damaged.
Pros and Cons
Pros
- Supports a wide range of wire sizes (16/25 mm²)
- High current carrying capacity (80A)
- Multiple connection points per pole for branching
- Secure screw clamp connections
- Designed for electrical safety (finger-safe)
- Easy DIN rail mounting
Cons
- Primarily for main cable branching applications
- Not suitable for very fine stranded wires without proper termination
- Requires adequate space within the enclosure
Setup, Compatibility & Care
Setup:
- Ensure the main power supply is disconnected.
- Mount the KH24C terminal block onto a standard DIN rail using its integrated mounting clip.
- Strip the appropriate length of insulation from your 16 mm² or 25 mm² wires according to the terminal's specifications.
- Insert the conductors into the respective screw clamp connections.
- Tighten the screws firmly using a suitable screwdriver to secure the wires. Over-tightening should be avoided.
Compatibility:
- Compatible with standard 35mm DIN rails.
- Suitable for solid and stranded copper conductors within the 16 mm² to 25 mm² range.
- Designed for main branch circuit applications.
Care:
- Periodically inspect connections for tightness. Re-tighten if necessary, ensuring the power is off.
- Keep the terminal block clean and free from dust and debris. A dry or slightly damp cloth can be used for cleaning; ensure the unit is completely dry before restoring power.