Shark PowerDetect UV Reveal Robot Vacuum and Mop - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Shark PowerDetect UV Reveal Robot Vacuum and Mop is designed for busy households seeking a deeper, more hygienic clean with advanced detection and self-maintenance features. Its key benefit is the UV Reveal Technology that illuminates hidden messes, combined with HyperSonic Mopping and a self-sanitizing base for a superior clean. A potential caveat is its specialized base station which requires dedicated space.
All features
| Colour | White |
|---|---|
| Series | PowerDetect |
| Model Part Number | AV3010XEUKWH |
| Brand | Shark |
Extended Product Information
FAQs
How often should I empty the robot's dustbin?
It is recommended to empty the dustbin after each cleaning cycle to maintain optimal suction power.
Can I use any floor cleaner with the ThermaCharged base?
It is recommended to use only Shark VacMop Multi-Surface Floor Cleaner or solutions specifically approved by Shark to avoid damaging the system.
How does the UV Reveal Technology work?
The UV light illuminates hidden messes like pet stains and ground-in dirt, which are then detected by RGB sensors to ensure thorough cleaning of these specific areas.
What is the warranty period for this robot vacuum?
This product comes with a 2-year guarantee upon registration with Shark (UK only).
Does the robot vacuum operate on battery power, and how long does it last?
The robot operates on a rechargeable battery. Battery life varies depending on cleaning mode and settings, but it is designed to cover a typical home size on a single charge and will return to dock to recharge if needed.
Is the robot loud during operation?
Noise levels are comparable to other robot vacuums. Specific decibel ratings can be found in the product's technical specifications.
Troubleshooting
Robot not returning to the dock
Ensure the dock has adequate clearance and is not obstructed. Check if the dock's power connection is secure and the robot's charging contacts are clean.
UV Reveal feature not activating
Verify that the UV Reveal function is enabled in the Shark app settings. Ensure the robot is in a sufficiently dark environment for the UV light to be effective.
Mopping leaves streaks or is ineffective
Check that the mop pad is properly attached and saturated. Ensure the correct cleaning solution is used and the mop pad is clean. Clean the nozzle for the cleaning solution.
Robot gets stuck frequently
Clear any clutter or potential obstacles from the cleaning path. Ensure the robot's Object Detect sensors are clean and unobstructed.
Base station not washing or drying mop pad
Confirm the water reservoir is filled and the drain is not blocked. Check for any error messages in the app. Ensure the power supply to the base is stable.
Pros and Cons
Pros
- Advanced UV light technology effectively reveals and targets hidden messes.
- Self-sanitizing and drying mop pad base offers superior hygiene and convenience.
- Comprehensive suite of sensors ensures thorough cleaning and obstacle avoidance.
- Combines vacuuming and mopping for a complete floor care solution.
- TÜV Rheinland certification for bacteria elimination provides peace of mind.
Cons
- Requires a dedicated space for the larger self-sanitizing base station.
- Initial setup and app configuration may take time.
- The effectiveness of UV detection can vary based on surface reflectivity.
- Replacement mop pads and cleaning solutions are consumables.
Setup, Compatibility & Care Instructions
Initial Setup:
- Unpack the robot, charging dock, and accessories.
- Place the charging dock in an area with good Wi-Fi coverage and clear space around it.
- Connect the robot to your home Wi-Fi network using the Shark app.
- Install the side brushes and ensure the Anti-Odour cartridge is correctly placed in the base.
- Charge the robot fully before its first cleaning cycle.
Compatibility:
- Flooring: Suitable for vacuuming carpets and hard floors. Mopping function is designed for sealed hard floors.
- App Control: Requires a smartphone with the Shark app installed for advanced features and scheduling.
- Cleaning Solution: Use only Shark VacMop Multi-Surface Floor Cleaner or approved alternatives in the base station.
Care and Maintenance:
- Dustbin: Empty the dustbin after each use.
- Filters: Clean or replace filters regularly according to the app's recommendations.
- Brushes: Remove hair and debris from side brushes and main brush roll.
- Mop Pads: The ThermaCharged base washes and dries the mop pads; however, occasional manual cleaning might be necessary for heavily soiled pads.
- Sensors: Gently wipe sensors with a dry, soft cloth to ensure optimal performance.