HabiStat Classic Pro Reptile Thermostat - Black - 450W
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The HabiStat Classic Pro Reptile Thermostat is designed for reptile keepers needing precise temperature control in their enclosures, particularly those using heat lamps. Its key benefit is providing smooth, continuous power for accurate temperature regulation, unlike simple on/off thermostats. However, it's important to note that this thermostat is specifically designed for light-admitting heat sources and may not be suitable for all heating methods.
All features
| Colour | Black |
|---|---|
| Model Part Number | 450W |
| Brand | Habistat |
Extended Product Information
FAQs
How do I set the temperature?
Use the up and down buttons on the thermostat to adjust the temperature. The display will show the current and set temperatures.
What type of heat sources can I use?
The thermostat is designed for light-admitting heat sources such as heat lamps.
What is the function of the probe?
The probe measures the enclosure temperature. Place it in a representative location within the enclosure.
What do I do if the display is not working?
Check the power supply and ensure the unit is plugged in correctly. If the problem persists, contact customer support.
How often should I check the thermostat?
It is recommended to check the thermostat and the enclosure temperature daily, or as frequently as necessary, to ensure proper function.
What is the maximum wattage the thermostat can handle?
The thermostat can handle a maximum of 450 watts.
How do I replace the fuse?
Unplug the thermostat. Open the fuse compartment (usually located near the power input). Replace the fuse with a new quick-blow fuse of the same rating.
Troubleshooting
Thermostat not turning on.
Check the power connection to the outlet and ensure the fuse in the thermostat is intact. Replace the fuse if necessary.
Enclosure temperature not reaching the set temperature.
Ensure the heat source is working and that its wattage is appropriate for the enclosure size. Check the probe placement and adjust the thermostat settings.
Temperature fluctuations.
Check the probe placement to ensure it's not too close to the heat source or in a drafty area. Also ensure that the heat source is working correctly.
Pros and Cons
Pros
- Precise temperature control for optimal reptile health.
- Smooth power delivery extends the lifespan of heat lamps.
- Easy-to-read display and simple controls.
- Built-in safety features like the over-temperature alarm and fuse.
- Designed specifically for reptile keeping, ensuring compatibility and effectiveness.
Cons
- Only suitable for light-admitting heat sources.
- Requires careful probe placement for accurate readings.
- Limited to a maximum of 450 watts, which might not be sufficient for very large enclosures.
- May require some initial setup to understand the dimming functionality.
Setup, Compatibility & Care
- Placement: Position the thermostat in a dry and accessible location near the enclosure. Place the probe in the enclosure, away from the heat source and in a location representative of the overall temperature.
- Connections: Plug the heat lamp into the thermostat and the thermostat into a power outlet.
- Temperature Setting: Use the up/down buttons to set your desired temperature. The LCD will display the current and set temperatures.
- Compatibility: This thermostat is designed for use with light-admitting heat sources, such as heat lamps. Ensure that the wattage of your heat source does not exceed 450W.
- Care: Regularly check the probe's placement and the temperature readings. Clean the unit with a dry or slightly damp cloth. Never submerge the unit in water.