kenable 12 Way Terminal Strip - 3A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The kenable 008648 is a 12-way terminal strip designed for audio and video power connections up to 3 Amps. It's ideal for installers and DIY enthusiasts needing to join or extend power cables cleanly. While versatile, it's limited to lower amperage applications.
All features
| Model Part Number | 008648 |
|---|---|
| Brand | kenable |
Extended Product Information
FAQs
What is the maximum current this terminal strip can handle?
The kenable 008648 terminal strip is designed for a maximum current of 3 Amps.
Can this strip be used for data cables?
No, this terminal strip is specifically designed for power connections and is not suitable for data or signal transmission.
How do I cut the terminal strip to a smaller size?
You can cut the strip to your desired length using a sharp knife, hobby saw, or strong wire cutters. It's recommended to score the line first for a cleaner cut.
What material is the terminal strip made from?
The terminal strip is made from polyethylene, which is an insulating plastic.
What type of cables can be connected?
It is suitable for low-power audio, video, and general power cables rated at 3 Amps or less.
How many connection points does it offer?
The terminal strip offers a total of 12 connection points, arranged as individual screw terminals.
What are the dimensions of the strip?
The dimensions are approximately 95mm in length, 15mm in width, and 12.5mm in height.
Troubleshooting
Intermittent connection or no power to a device.
Ensure the screw terminals are fully tightened. Check that the wire conductors are properly inserted and making good contact. Verify the cable is within the 3 Amp limit.
Strip breaks unevenly when cut.
Use a sharp cutting tool and apply steady pressure. Score the polyethylene along the intended division line before cutting to achieve a cleaner break.
Overheating at a connection point.
Immediately disconnect power. Check if the load exceeds 3 Amps. Ensure the screw terminal is tight and the wire is properly seated. If issues persist, replace the strip and verify the total current draw.
Pros and Cons
Pros
- Offers a high number of connection points in a compact form.
- Easily customisable to required strip lengths.
- Simple and secure screw terminal connections.
- Suitable for low-voltage and low-current audio/video applications.
- Cost-effective solution for cable joining.
Cons
- Limited to a maximum of 3 Amps, not suitable for high-power devices.
- Requires manual cutting for subdivision, potentially creating rough edges.
- Basic polyethylene construction may not be suitable for harsh environments.
- Not designed for data or signal connections, only power.
Setup, Compatibility & Care
Setup:
- Determine the required number of connection points. If fewer than 12 are needed, carefully cut the strip to the desired length using appropriate tools (e.g., a sharp knife or wire cutters).
- Expose the conductors of the power cables you wish to connect.
- Insert the conductors into the terminal holes, ensuring no stray wires are present.
- Use a screwdriver to tighten the screw terminals securely onto the conductors, creating a firm connection.
- Repeat for all desired connection points.
Compatibility:
This terminal strip is designed for use with power cables rated for 3 Amps or less. It is compatible with audio and video power cables, as well as other low-power DC or AC applications within its current rating. Ensure the wire gauge is appropriate for the terminal screws.
Care:
- Keep the terminal strip clean and free from dust and debris.
- Periodically check screw terminals for tightness to ensure a secure connection.
- Avoid exposing the strip to excessive moisture or extreme temperatures.