Bond It Cove-Mate Coving Adhesive - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Bond It Cove-Mate to install coving, skirting boards, or other decorative elements. It offers a strong, solvent-free bond, eliminating the need for mechanical fixings in many applications. A key consideration is ensuring surfaces are clean and prepared for optimal adhesion.
All features
| Colour | White |
|---|---|
| Model Part Number | BDCMWH-B |
| Brand | Bond it |
Extended Product Information
FAQs
What surfaces can I use Cove-Mate on?
Cove-Mate is suitable for plaster, brick, stone, polystyrene, PU, and cork.
Can I paint over Cove-Mate?
Yes, Cove-Mate can be painted over once it is fully dry.
How long does it take for Cove-Mate to dry?
Drying time depends on environmental conditions. Allow sufficient time for the adhesive to dry completely before painting or applying any load.
How do I clean up Cove-Mate?
Clean up any excess adhesive with a damp cloth before it dries.
Is Cove-Mate solvent-free?
Yes, Cove-Mate is a solvent-free adhesive.
Can I use Cove-Mate on exterior surfaces?
Cove-Mate is designed for interior use only.
What is Cove-Mate ideal for?
Cove-Mate is ideal for fixing polystyrene and PU covings, skirting boards, architraves, dado rails, bonding worktops to base units and bonding cork tiles and cork sheet.
Troubleshooting
Poor adhesion.
Ensure surfaces are clean, dry, and free from contaminants. Roughen smooth surfaces slightly to improve adhesion.
Adhesive not setting properly.
Check the expiration date of the adhesive. Ensure that the correct application method was followed.
Difficult to apply.
Make sure the nozzle is cut correctly and the sealant gun is functioning properly.
Pros and Cons
Pros
- Strong adhesion for various materials.
- Replaces mechanical fixings, saving time and effort.
- Easy to apply with a standard sealant gun.
- Dries to a white finish.
- Can be over painted.
Cons
- Requires careful surface preparation for best results.
- Not suitable for extremely heavy items without additional support.
- Drying time needs to be considered before painting.
- May require more product for porous surfaces.
Setup, Compatibility & Care
- Preparation: Ensure all surfaces are clean, dry, and free from grease, dust, or contaminants. Remove any existing loose materials.
- Application: Cut the tip off the cartridge and cut the nozzle to the desired bead width at a 45-degree angle. Place the cartridge in a standard sealant gun.
- Application Method: Apply the adhesive to the item to be fixed and press firmly against the surface.
- Compatibility: Compatible with plaster, brick, stone, polystyrene, PU, cork and other common construction materials.
- Care: Clean up any excess adhesive immediately with a damp cloth before it dries. Allow the adhesive to dry completely before painting. Store the product in a cool, dry place and reseal after use.