Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Ceag Ex-proof plug (MPN: GHG5117306R0001) is designed for professionals requiring safe electrical connections in hazardous environments, including explosive gas and dust zones. Its primary benefit is ensuring operational safety in potentially explosive atmospheres with its robust PA plastic construction and adherence to stringent safety standards. A potential consideration is its specific voltage and current ratings, requiring users to verify compatibility with their existing electrical systems.
| Model Part Number | GHG5117306R0001 |
|---|---|
| Brand | Ceag |
It means the plug is designed and certified to prevent ignition of explosive atmospheres (gas or dust) by containing any internal sparks or heat and resisting external ignition sources.
These zones classify the likelihood of an explosive atmosphere being present. Zone 1 and 2 are for gases, while Zone 21 and 22 are for dusts. This plug is suitable for all these zones.
No, this plug is rated for 250V mains voltage and is designed to work with 200-250V systems. Using it with an incompatible voltage can be dangerous and will cause damage.
The plug is rated for a maximum operating temperature of +55°C, corresponding to temperature class T6 (maximum 85°C internal temperature).
Always use the plug with compatible sockets (EN 60309-2, 250V, 16A, 6h). Ensure installation is performed by a qualified professional aware of Ex-area regulations, and that cable entry and strain relief are properly managed.
The clock hour position refers to the orientation of the earth/neutral pins relative to the live pin. '6h' is a standard configuration for specific voltage and amperage ratings within the EN 60309 standard.
Verify that the power source is active and providing 250V. Check that the plug is securely seated in the socket. Inspect the cable and plug for any visible damage. Ensure compatibility of voltage and current ratings.
Inspect the plug and socket contacts for dirt or corrosion. Clean contacts gently if necessary (with power disconnected). Ensure the cable is securely terminated within the plug and the socket.
Immediately disconnect power and remove the plug from service. Do not attempt to repair a damaged housing in an Ex-rated environment. Replace the plug with a new, certified unit.
Setup: Ensure the plug is installed by a qualified electrician experienced with Ex-rated equipment. Verify that the power source matches the plug's 250V and 16A ratings. Connect the cable securely through the straight cable entry, ensuring proper strain relief and sealing according to Ex-installation guidelines.
Compatibility: This plug is compatible with sockets and couplings conforming to EN 60309-2 standards with the same voltage (200-250V), current (16A), and clock hour position (6h). It is rated for explosion class IIC and temperature class T6.
Care: Regularly inspect the plug for any signs of damage, wear, or contamination. Clean the housing with a dry or slightly damp cloth only; avoid using solvents or abrasive cleaners. Ensure seals remain intact and the cable entry is secure. Always disconnect power before cleaning or inspection.
