CarPlan Engine Cleaner & Degreaser has been specially formulated to remove ingrained grease, oil, dirt and grime from all vehicle engines (automotive, commercial and marine) including aluminium surfaces. The unique ‘water washable’ formula is also suitable for general household & industrial applications such as removing tar spots and cleaning paintbrushes. DIRECTIONS FOR USE 1. Apply Engine Cleaner & Degreaser liberally over area to be treated and leave to penetrate for two minutes. 2. Work the area with a stiff brush when using to clean oil, dirt and grease from engines and floors. Rub tar spots with a soft cloth soaked in the degreasing cleaner. Work solution well into bristles when cleaning paint brushes. 3. After two minutes, oil, dirt and grease deposits will break down and dissolve. Then, rinse with plenty of clean water. 4. For particularly difficult areas, repeat process again if necessary. IMPORTANT Do not apply CarPlan Engine Cleaner & Degreaser to a hot or running engine- for best results, use when the engine is slightly warm. Do not use on tarmacadam- spillage on such surfaces should be flushed away immediately. Not suitable for use with cellulose paints. Do not use in parts tank cleaners with pumps.