DecoArt Americana Decor Matte Metallics - Rose Gold
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and home decorators looking to add a sophisticated metallic sheen to projects. The key benefit is achieving a high-end, true metallic finish with minimal preparation, though results can vary based on surface and application technique. DecoArt Americana Decor Matte Metallics is an advanced acrylic paint featuring patent-pending reflective technology for a uniform shimmer, suitable for both subtle accents and full coverage on various home decor and furniture pieces.
All features
| Model Part Number | ADMMT01-36 |
|---|---|
| Brand | DecoArt |
Extended Product Information
FAQs
Do I really not need to prime or sand?
For most common surfaces like wood, metal, and previously painted items, priming and sanding are not required. However, very glossy or slick surfaces might benefit from a light scuff or a coat of primer for optimal adhesion.
How long does one jar of paint cover?
One 8 oz jar provides coverage for approximately 12 square feet when applying two coats.
Can this paint be used on fabric?
This paint is designed for home decor and furniture. For fabric, consider using DecoArt's fabric paints, as this formula may not be flexible enough and could crack.
What is the best way to clean my brushes after use?
Clean your brushes immediately after use with soap and warm water. Rinse thoroughly until all paint residue is removed.
Is the Rose Gold color consistent across batches?
DecoArt strives for color consistency. However, it's always recommended to purchase all the paint needed for a single project at one time to minimize any slight batch variations.
How long does the paint need to cure before it's fully durable?
The paint should be allowed to cure for at least 72 hours before the item is put into heavy use or subjected to frequent cleaning.
Can I mix different colors of Matte Metallics?
Yes, the Matte Metallics line can be mixed to create custom metallic shades. Stir thoroughly after mixing to ensure a uniform finish.
Troubleshooting
Uneven metallic finish
Ensure the paint is stirred thoroughly before use. Apply thin, even coats and avoid over-brushing. Allow adequate drying time between coats.
Paint is too thick or streaky
Stir the paint well. If still too thick, a very small amount of water (less than 5%) can be added, but avoid over-diluting as it can affect the finish.
Poor adhesion on a surface
Verify the surface was clean and dry before application. For challenging surfaces like plastic or glossy finishes, a light sanding or a specialized primer may be necessary.
Color appears dull after drying
This can happen if the paint was over-thinned or if the surface is porous. Ensure two coats are applied and that the paint was stirred adequately.
Pros and Cons
Pros
- Achieves a genuine, high-end metallic look.
- Eliminates the need for priming or sanding, saving preparation time.
- Durable and suitable for indoor and outdoor use.
- Easy soap and water cleanup.
- Non-toxic formula enhances safety during use.
- Good coverage per jar.
Cons
- Results may vary depending on the surface texture and application skill.
- Requires two coats for optimal coverage and metallic effect.
- Specific techniques might be needed for the smoothest finish.
- Limited to the available 14 metallic colors.
- Wide-mouth jar may require a separate palette for detailed work.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from dust, grease, or wax.
- Stir the paint thoroughly before use; do not shake. The reflective pigments may settle.
- Apply directly to the surface. For best results, apply two thin coats.
Compatibility:
- Suitable for a wide range of surfaces including wood, metal, glass, ceramic, plaster, canvas, and pre-primed foam.
- Recommended for indoor and outdoor use.
- Can be applied over existing latex or acrylic paints that are clean and dry.
Care:
- Allow paint to cure for 72 hours before heavy use or cleaning.
- Clean brushes, tools, and spills immediately with soap and water.
- For finished pieces, wipe clean with a soft, damp cloth. Avoid abrasive cleaners.