Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for users of the Sealey HVLP Pressure Pot System, offering a comprehensive understanding of its use and care. The system provides consistent and professional results, ideal for commercial refinishing. Note that the system requires a compatible air compressor and appropriate safety measures should always be taken.
| Model Part Number | HVLP-79/P |
|---|---|
| Brand | Sealey |
HVLP stands for High Volume Low Pressure. It means a high volume of air at a low pressure is used to atomize the paint, resulting in less overspray and a more efficient paint transfer.
The nozzle size depends on the paint and the desired finish. Consult the paint manufacturer's recommendations. The system is supplied with a 1.7mm set-up, but other sizes are available.
Disassemble the spray gun and clean each component with appropriate solvent for your paint type. Ensure all paint residue is removed.
A compressor providing 6-10 CFM at 43 psi is required.
Clean the spray gun and pressure pot thoroughly after each use.
Check the paint manufacturer's recommendations and ensure the paint is compatible. Using the wrong solvents can damage the system.
Components of this system are available separately. Contact your supplier for specific parts.
Check the air pressure, nozzle size, and paint viscosity. Ensure the nozzle is clean and free of blockages. Adjust the spray pattern and fluid control as necessary.
Check air pressure and paint viscosity. Ensure the nozzle is clean and the spray pattern is adjusted correctly. Reduce air pressure or thin the paint if needed.
Check all connections and seals for leaks. Tighten connections or replace seals as needed.
Ensure the pressure pot is properly sealed and pressurized. Check the paint feed tube for blockages.
