Connect 4 Pin EFI Connector Kit 10 Piece Set - 37343
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Connect 4 Pin EFI Connector Kit is designed for automotive professionals and DIY enthusiasts needing to repair or replace wiring for sensors and injectors. Its primary benefit is providing a secure, weatherproof connection for critical engine components. A potential caveat is the need for specific crimping tools for optimal terminal connection. The kit includes a 4-pin female connector, PVC sleeve, terminals, and seals, facilitating reliable repairs.
All features
| Model Part Number | 37343 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What is included in the Connect 4 Pin EFI Connector Kit?
The kit contains 1 x 4 Pin female connector, 1 x PVC sleeve, 4 x non-insulated terminals, and 4 x weatherproof seals.
What types of components can this connector be used for?
It is suitable for various EFI components such as air temperature sensors, coolant sensors, and fuel injectors.
Do I need special tools to install this kit?
Yes, appropriate crimping tools are required for securely attaching the terminals to the wires.
How do I ensure the connection is weatherproof?
The kit includes weatherproof seals and a PVC sleeve that must be correctly installed to create a barrier against moisture.
Can I use this kit for other types of connectors?
This specific kit is for a 4-pin EFI connector. For other types, you would need a different connector kit.
Where can I find the larger harness repair kit mentioned?
The product description mentions it's part of an assorted connector & harness repair kit with Part No. 37340.
Troubleshooting
Connector not sealing properly
Ensure the weatherproof seals are fully seated and the PVC sleeve is correctly positioned and secured.
Intermittent connection after repair
Re-crimp the terminals to ensure a secure connection. Check for any wire damage beyond the crimp point.
Difficulty inserting terminals into the connector
Verify the terminals are fully crimped and properly oriented. Ensure no wires are protruding past the terminal.
Pros and Cons
Pros
- Provides a complete set of parts for a single connector repair.
- Designed for common automotive sensor and injector applications.
- Includes weatherproof seals for enhanced durability and reliability.
- Offers a cost-effective solution for harness repairs.
- Easy to integrate into existing wiring harnesses.
Cons
- Requires specialized crimping tools for proper terminal installation.
- Each kit is for a single connector, potentially requiring multiple kits for extensive repairs.
- Non-insulated terminals require careful sealing to maintain weatherproofing.
- May not be compatible with all sensor or injector types if pinout differs.
Setup, Compatibility & Care
Setup:
- Carefully strip the wires of the existing harness and the new terminals.
- Using appropriate crimping pliers, securely crimp the non-insulated terminals onto the stripped wires.
- Slide the weatherproof seals onto the wires, ensuring they are positioned correctly to seal around the connector pins.
- Insert the crimped terminals into the 4-pin female connector, ensuring they click into place.
- Slide the PVC sleeve over the assembled connector, ensuring it creates a tight seal.
Compatibility:
This connector is designed for applications using a 4-pin configuration commonly found on EFI systems. Verify the pinout and connector type of your specific sensor or injector to ensure compatibility. It is part of the Connect range of harness repair kits, suggesting compatibility with other Connect products.
Care:
Inspect the connector periodically for signs of damage or corrosion. Ensure the seals remain intact and properly seated. Clean the exterior of the connector with a dry or slightly damp cloth; avoid harsh chemicals.