Easipaste Ready Mixed Wallpaper Adhesive - Bartoline - RW0973
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to use Bartoline Easipaste Ready Mixed Wallpaper Adhesive. It offers a convenient, ready-to-use solution for hanging various wallpaper types, promising strong adhesion and easy application. Keep in mind that for heavy embossed wallpapers, coverage is reduced.
All features
| Model Part Number | RW0973 |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
How much area does a 1kg tub of Easipaste cover?
1Kg of Easipaste® is sufficient to hang approximately one 10-metre roll of standard wallcovering, or half a roll of embossed or heavy embossed wallcovering.
What surfaces can I use Easipaste on?
Easipaste is suitable for most common interior surfaces, provided they are properly prepared. Always ensure the surface is dry, clean, and free from loose debris.
Do I need to mix the adhesive?
No, Easipaste is ready-mixed and does not require any dilution.
Can I use Easipaste on freshly plastered walls?
New plaster should be sealed with PVA or Size before applying Easipaste.
How should I apply the adhesive to the wallcovering?
For traditional wallcoverings, apply Easipaste by brush or roller to the reverse of the wallcovering, ensuring complete and even coverage. For 'paste the wall' wallpapers apply Easipaste evenly and generously onto the wall surface.
What should I do if the adhesive gets on the patterned side of the paper?
Immediately remove any paste that comes into contact with patterned sides of the wallcovering using a clean, damp sponge.
Troubleshooting
Wallpaper not sticking properly.
Ensure the surface is properly prepared (clean, dry, and sealed if necessary). Make sure you are using enough adhesive and the correct type for your wallpaper. Check that the wallpaper is applied according to manufacturer's instructions.
Adhesive showing through the wallpaper.
Avoid applying too much adhesive. Remove any excess adhesive immediately with a clean, damp sponge, especially on patterned surfaces.
Pros and Cons
Pros
- Ready to use, saving time and effort.
- Suitable for various wallpaper types.
- Provides strong initial tack for easier application.
- Offers good slip properties for adjustments.
Cons
- Coverage is reduced for heavy embossed wallpapers.
- Requires careful application to avoid adhesive on the patterned side of the paper.
Setup, Compatibility & Care
Setup
- Preparation: Surfaces should be sound, dry, clean, and free from damp, dust, and grease. Gloss painted surfaces should be sanded to provide a key. Very porous surfaces such as new plaster should be sealed with PVA or Size.
- Opening: Break the seal and lift the lid to access the adhesive.
- Application: Always follow the wallcovering manufacturer’s instructions.
Compatibility
- Wallcoverings: Compatible with vinyl, blown vinyl, heavy embossed, washables, and ‘paste the wall’ wallcoverings.
Care
- For traditional wallcoverings, apply Easipaste® by brush or roller to the reverse of the wallcovering, ensuring complete and even coverage. Avoid getting the adhesive on the patterned side of the paper.
- For heavy coverings, allow time for the paste to soak until supple.
- Immediately remove any paste that comes into contact with patterned sides of the wallcovering.
- For ‘paste the wall’ wallcoverings apply Easipaste® evenly and generously onto the wall surface, ensuring that the pasted area is slightly wider than the width of the wallpaper.