A solvent-based, water-repelling Decking Oil that penetrates deeply into both smooth and planed, rough-sawn decking and exterior timber. It is formulated to preserve, protect, and restore, preventing splitting and surface growth of algae while offering high resistance to wear and water penetration with excellent beading. Available in a range of natural color shades containing UV filters that resist color fade. Ideal for use on all pressure/preservative treated hardwood or softwood Decking, Panelling, Sheds, and Fencing. Preparation: Ensure all surfaces are clean, dry, and free from any previous finish. Remove any fungal growth, dirt, or moss on old wood prior to application. Sand the substrate with a medium 120-grade sanding paper, removing all traces of dust. Application: Apply in dry conditions. Always test on a small area prior to initial application to check color shade. On all new timber, coat thoroughly to seal, ideally prior to installation. First Coat: Stir contents thoroughly before and during use. Apply consistently using a good quality bristle or synthetic brush and lay evenly, following the direction of the grain. Leave to dry for 24/48 hours. Second Coat: Sand lightly if necessary and apply as the first coat. Longer drying periods may occur during application in cold, damp, or humid conditions. Coverage: A single application will approximately cover 8 square meters per litre, depending on the density of the substrate.