Eureka J15 Max Robotic Vacuum Cleaner - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Eureka NERJ15MAXULTRABK is an advanced robotic vacuum cleaner designed for busy households seeking a comprehensive cleaning solution. Its key benefit lies in its 2-in-1 vacuuming and mopping capabilities, coupled with AI-driven navigation and an all-in-one docking station for automated emptying and recharging. A potential consideration is its 6-hour charging time, which requires planning for continuous use.
All features
| Colour | Black |
|---|---|
| Model Part Number | NERJ15MAXULTRABK |
| Brand | Eureka |
Extended Product Information
FAQs
How long does the battery last?
The Eureka NERJ15MAXULTRABK has a Lithium-Ion battery with a capacity of 6400 mAh, providing up to 180 minutes of runtime on a single charge.
What is the dust capacity?
The robot vacuum itself has a dust capacity of 0.3 L. The all-in-one docking station has a larger dust capacity of 4 L, which holds debris from multiple cleaning cycles before needing attention.
Does this robot vacuum mop?
Yes, the Eureka NERJ15MAXULTRABK features wet mopping capabilities in addition to vacuuming, offering a 2-in-1 cleaning solution for various floor types.
How does the docking station work?
The all-in-one docking station automatically empties the robot's dustbin, recharges the battery, and provides 55°C hot air drying for the mop pad after cleaning.
Is this robot vacuum suitable for homes with pets?
Yes, it features Flexi Razor technology designed to cut tangled hair, making it effective for managing pet hair on floors.
What type of navigation does it use?
It uses IntellView AI 2.0 with advanced navigation, incorporating LiDAR, radar, cameras, and infrared sensors for intelligent mapping and obstacle detection.
How do I control the robot vacuum?
You can control it using the Eureka App on your smartphone or tablet for remote operation, scheduling, and customizing cleaning modes.
What is the charging time?
The charging time for the Eureka NERJ15MAXULTRABK is approximately 6 hours.
Troubleshooting
Robot not charging
Ensure the robot is properly aligned with the charging contacts on the docking station. Check that the charging contacts on both the robot and the station are clean. Verify the docking station is powered on.
Robot not connecting to Wi-Fi
Confirm your Wi-Fi network is 2.4GHz (5GHz is often not supported by robot vacuums). Restart your router and the robot vacuum. Ensure you are entering the correct Wi-Fi password in the Eureka App.
Poor suction power
Check if the robot's dustbin is full and needs emptying. Inspect the brushes and filters for blockages or dirt. Ensure no debris is obstructing the suction inlet.
Robot getting stuck or not navigating properly
Clean all sensors, including cliff sensors and obstacle detection cameras. Ensure the robot's map is accurate and that there are no new obstacles creating navigation issues. Check if the docking station is positioned correctly.
Mopping function not effective
Ensure the water tank is filled. Check that the mop pad is clean and properly attached. Verify that the mop settings in the app are adjusted correctly for the floor type.
Docking station not emptying the dustbin
Ensure the dustbag in the station is not full and is installed correctly. Check for any blockages in the emptying port between the robot and the station. Ensure the station has power.
Pros and Cons
Pros
- Combines vacuuming and mopping for a comprehensive clean.
- Intelligent AI navigation system for efficient cleaning paths.
- Self-emptying and self-cleaning docking station reduces manual effort.
- Anti-tangle brush design is beneficial for households with pets or long hair.
- Long battery life of up to 180 minutes.
- App control and scheduling offer convenience and customization.
Cons
- Long charging time of 6 hours.
- Noise level of 78 dB may be noticeable.
- Dust container capacity in the vacuum unit is relatively small (0.3 L).
- Requires regular maintenance of the docking station and mop pad.
- Virtual barriers are not included for precise zone control.
Setup, Compatibility & Care
Setup:
- Unpack Components: Carefully unpack the robot vacuum, docking station, power cord, and any included accessories.
- Position Docking Station: Place the docking station on a hard, level surface against a wall, ensuring at least 0.5 meters of clearance on each side and 1.5 meters in front for optimal automatic return.
- Connect Power: Plug the power cord into the docking station and a wall outlet.
- Install Dust Bag: Ensure a dust bag is correctly installed in the docking station.
- Charge Robot: Place the robot vacuum onto the charging contacts of the docking station. Allow it to charge fully (approximately 6 hours) before its first use.
- Download App: Download the Eureka App from your smartphone's app store (compatible with iOS and Android).
- Connect to Wi-Fi: Follow the app's instructions to connect the robot vacuum to your home Wi-Fi network.
Compatibility:
- App Control: Compatible with the Eureka App for smartphone/tablet remote control, scheduling, and monitoring.
- Floor Surfaces: Supports cleaning on carpet, hard floor, laminate, linoleum, parquet, tiles, vinyl, and wood.
- Voice Assistants: (Check app for specific integrations - not explicitly stated in provided data).
Care & Maintenance:
- Dustbin: Empty the robot's onboard dustbin (0.3 L) regularly or rely on the self-emptying function of the docking station (4 L capacity).
- Main Brush & Side Brushes: Clean the brushes weekly to remove debris and hair. The Flexi Razor technology assists with hair cutting, but occasional manual removal may be needed.
- Filters: Clean or replace the 5 HEPA filters as recommended by the app or manual to maintain optimal suction and air quality.
- Sensors: Wipe all sensors (LiDAR, cameras, bumper, cliff sensors) with a clean, dry cloth weekly to ensure accurate navigation.
- Mop Pad: Clean the mop pad after each use. The docking station offers hot air drying to prevent mildew.
- Charging Contacts: Ensure charging contacts on both the robot and the docking station are clean and free of debris.
- Wheels: Check and clean the wheels periodically.