Klauke ST1719 Pin terminal - 35 mm² Not insulated Silver
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Klauke ST1719 Pin Terminal is designed for professional electricians and technicians requiring secure and durable electrical connections for 35 mm² conductors. Its key benefit is the high-quality brazing process and tin-plating, ensuring excellent conductivity and corrosion resistance. A potential consideration is its non-insulated nature, requiring careful installation to prevent short circuits. This product facilitates reliable interfacing between cables and equipment in various electrical applications.
All features
| Model Part Number | ST1719 |
|---|---|
| Brand | Klauke |
Extended Product Information
FAQs
What type of cable is the ST1719 designed for?
The Klauke ST1719 is designed for conductors, specifically those conforming to VDE 0295 class 2, with a maximum cross-section of 35 mm².
Is the Klauke ST1719 insulated?
No, the Klauke ST1719 is a non-insulated pin terminal. This means it must be installed with care to prevent accidental contact with other components or conductors.
What is the benefit of the electro-tinning?
Electro-tinning protects the copper terminal from corrosion, ensuring a longer lifespan and maintaining good electrical conductivity over time.
How many terminals are in a pack?
The Klauke ST1719 is typically supplied in packs of 50 pieces.
What tools are needed to install the ST1719?
Installation requires a compatible hydraulic or mechanical crimping tool with the appropriate die set for 35 mm² terminals. Standard pliers are not sufficient.
Can I use this terminal for stranded or solid core wire?
The description mentions conductors eg VDE 0295 class 2, which are typically stranded conductors. It is best suited for stranded copper conductors of the specified size.
Troubleshooting
Terminal does not crimp securely
Verify that the correct die set for 35 mm² terminals is being used with the crimping tool. Ensure the conductor is fully inserted into the terminal before crimping. Check the crimping tool for proper function.
Poor electrical connection or high resistance
Ensure the conductor and terminal interior are clean and free of oxidation. Confirm a proper crimp has been achieved with adequate pressure. Check for any damage to the tin-plating or conductor.
Corrosion observed on the terminal
Store unused terminals in a dry environment. Ensure installed connections are protected from moisture if the environment is humid. Clean lightly corroded areas with a suitable contact cleaner if necessary, and ensure the terminal is functioning correctly.
Pros and Cons
Pros
- Excellent conductivity due to high-quality copper and tin plating.
- Durable construction with a high-quality brazing process.
- Corrosion resistance enhances longevity.
- Secure fit for 35 mm² conductors.
- Groove embossing improves contact reliability.
Cons
- Non-insulated design requires careful handling and installation to prevent shorts.
- Requires specific crimping tools for proper application.
- Not suitable for environments where insulation is a primary safety requirement without additional measures.
Setup, Compatibility & Care
Setup:
- Ensure the cable conductor is clean and free of debris.
- Strip the insulation from the end of the 35 mm² cable to the appropriate length, as specified by the crimping tool manufacturer.
- Insert the conductor fully into the Klauke ST1719 pin terminal.
- Use a compatible hydraulic or mechanical crimping tool with the correct die set for 35 mm² terminals to create a secure, permanent connection. Ensure the crimp is applied according to the tool's instructions, often marked with an "X" or specific indentation.
Compatibility:
- Cable Size: Designed specifically for conductors with a maximum cross-section of 35 mm² (conforming to VDE 0295 class 2).
- Tools: Requires specialized crimping tools designed for this terminal size and type. Consult your crimping tool manual for compatibility.
Care:
- As these are non-insulated terminals, avoid contact with live electrical components after installation.
- Keep terminals in a dry environment to maintain the integrity of the tin-plating and prevent corrosion.
- Periodically inspect connections for any signs of corrosion or physical damage, especially in harsh environments.