Loctite Epoxy Adhesive - Grey
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Loctite Grey Epoxy Adhesive, a high-performance adhesive ideal for structural bonding of metal components. It offers high temperature resistance and thermal conductivity, providing a strong and durable bond. Note that the long fixture time requires careful planning.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 9497 |
| Brand | Loctite |
Extended Product Information
FAQs
What is the fixture time?
The fixture time is 780 minutes. Ensure parts are held securely during this time.
What is the maximum temperature the adhesive can withstand?
The adhesive can withstand temperatures up to +180°C.
What materials is this adhesive suitable for?
This adhesive is ideal for bonding metal components.
Can this adhesive fill gaps?
Yes, it can fill gaps up to 0.50mm.
How should I store the adhesive?
Store in a cool, dry place.
What safety precautions should I take?
Avoid contact with skin and eyes. Use in a well-ventilated area.
Troubleshooting
Bond fails to hold.
Ensure surfaces were properly cleaned and prepped. Verify that the correct amount of adhesive was used and that the parts were clamped securely during the fixture time.
Adhesive doesn't cure properly.
Check the expiration date of the adhesive. Ensure the two parts were mixed thoroughly. Maintain the recommended temperature during the curing process.
Pros and Cons
Pros
- High shear/peel strength ensures strong bonding.
- Excellent for structural bonding of metal components.
- Thermally conductive for heat-sensitive applications.
- High-temperature resistance for use in demanding environments.
Cons
- Long fixture time (780 minutes) requires careful planning and patience.
- Limited gap fill (0.50mm) may not be suitable for all surface imperfections.
Setup, Compatibility & Care
Setup:
- Ensure the surfaces are clean, dry, and free from oil or grease.
- Mix the two parts of the epoxy adhesive thoroughly according to the manufacturer's instructions.
- Apply the mixture to the surfaces to be bonded.
- Clamp the parts together and allow them to cure for the specified fixture time (780 minutes).
Compatibility:
- Compatible with metal components.
- Ensure compatibility with other materials before application.
Care:
- Store in a cool, dry place.
- Avoid contact with skin and eyes.
- Use in a well-ventilated area.