Draper D222 Thread Lock - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Draper D222 Thread Lock is designed for users needing a low-strength adhesive solution for securing small fasteners, particularly on low-strength metals. Its primary benefit is preventing vibration loosening and accidental adjustments without making disassembly impossible. A key caveat is its specific low-strength application; it is not suitable for high-stress or permanent fixtures.
All features
| Colour | White |
|---|---|
| Model Part Number | 24657 |
| Brand | Draper |
Extended Product Information
FAQs
What is the primary use of the Draper D222 Thread Lock?
It is ideal for low-strength thread locking on components like adjusting screws, countersunk head screws, and set screws, especially on low-strength metals.
What does 'low strength break away - 6Nm' mean?
This means that after the thread locker has cured, it will take approximately 6 Newton-meters of force to loosen the fastener, allowing for disassembly without damage.
Can I use this on high-vibration machinery?
This product is designed for low-strength applications. For high-vibration or high-stress machinery, a medium or high-strength thread locker would be more appropriate.
Is it safe to use on aluminum parts?
Yes, it is very good on low-strength metals, which includes aluminum, as it minimizes the risk of damage during disassembly.
How much thread locker should I apply?
Apply a small amount to the male threads. The goal is to engage all threads without excessive overflow once the parts are assembled.
What is the shelf life of this product?
Typically, unopened thread lockers have a shelf life of 1-2 years when stored properly in a cool, dry place. Refer to the packaging for specific date information.
Can this thread locker be used on stainless steel?
While it works well on low-strength metals, its effectiveness on stainless steel may vary. Always test on a small, non-critical area if unsure.
Troubleshooting
Thread locker not holding fastener securely.
Ensure threads were clean and dry before application. Verify that the fastener size and application are appropriate for low-strength locking. Allow adequate curing time.
Difficulty disassembling fastener.
Apply moderate heat (below 200°C) to the assembly, which should soften the thread locker. Use appropriate tools to apply torque. If the application is critical, reconsider using a lower strength product or no thread locker.
Product has thickened or dried in the bottle.
Ensure the cap was sealed properly after the last use. Store in a cool, dry environment. If significantly thickened, the product may be expired and should be replaced.
Pros and Cons
Pros
- Provides a secure hold against vibration for delicate components.
- Allows for easier disassembly compared to high-strength thread lockers.
- Protects low-strength metal threads from damage during assembly and disassembly.
- Convenient bottle for precise application.
Cons
- Not suitable for high-vibration or high-stress applications.
- May not provide sufficient holding power for larger or critical fasteners.
- Limited to low-strength break away applications.
- Breakaway torque is fixed at 6Nm, offering no adjustability.
Setup, Compatibility & Care
Setup: Ensure all threads are clean and dry before application. Apply a small amount of the thread locker to the male threads. Assemble components and allow the adhesive to cure as per manufacturer instructions (typically 24 hours for full strength, though functional cure is much faster).
Compatibility: This thread locker is specifically designed for low-strength applications and is particularly effective on low-strength metals. It is suitable for fasteners up to approximately M6 (1/4 inch) in size, where vibration is a concern but easy disassembly is also required. Avoid using on high-torque or high-temperature applications.
Care: Store the bottle in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed after each use to prevent the product from drying out. Clean any excess uncured liquid with a cloth. For cured excess, mechanical removal may be necessary.